www.blksmth.com

 

 

HOME

REFFLINGHAUS ANVILS - FOR SALE

THE BLACKSMITH & SHOP

GALLERY

"HOW TO", Shop Tips, Coal Forges, and Misc. Information

LINKS TO ASSOCIATED SITES

LINKS TO PHOTOS OF THE PAST

A PLACE TO COMMENT

 

Blacksmithing

 

 

SHADY GROVE BLACKSMITH SHOP

GRAND ISLAND, NEBRASKA

USA Dealer For:

Ernst Refflinghaus Anvils

Ennepetal-Milspe, Germany

http://www.ernst-refflinghaus.de/index.html

---Quality Anvils Since 1886---

Face Guaranteed Hard @ HRC 59 to a depth of over 1 inch

Tough Steel Throughout**  Consistent Quality   Designs Proven Over Time

Fine Finish on Face and Horns

Refflinghaus 470 Kg. (1035 Lb.) born in the year 2005 and a 5 Kg. (11 Lb.).  Style #9 with added side-shelf.

   Call 308 384 1088 or e-mail blksmth@charter.net to confirm current prices, style, sizes in stock, delivery times, and/or freight quotes.

Prices FOB Grand Island, Nebraska (Central USA)

Refflinghaus Anvils originate in kilograms and millimeters.  The conversion from the metric to the imperial system results in the approximate sizes and weights below.  Variations of up to 10% in sizes and weights can be expected.

All anvils face and horns are hardened from one end to the other.

Hardy holes are punched, taper slightly, and are relatively smooth inside.  Pritchell holes are drilled.

Upper surface of horns are polished and not painted as shown in pictures below.

The most popular anvils (normally stocked) are shown in green.  Other sizes and styles can be ordered (25% down payment) with a normal ship time of approximately 90 days for most styles and sizes.  Special orders, have a typical ship time of 6 to 12 months.  Special order price is subject to fluctuation in the Euro/Dollar exchange rate, and possible additional freight/broker charge unless the anvil is part of a normal anvil shipment.

No. 58

Anvil Weight Pounds Face Width Inches Total Length Inches Height Inches Foot Length Inches Hardy Hole Inches Pritchel Hole Inches #58 Price $
185- 5 25 9 1/2 10 1 + 3/4 1,350
220 5 29 10 1/2 11 1 + 3/4 1,750
275- 4 1/16 33 1/2 13 14 1 + 3/4 2,200
330- 5 1/4 32 12 13 1 + 7/8 2,650
460 5 40 1/2 14 1/2 16 1 + 7/8 3,500
550 5 44 16 18.50 1 + 7/8 4,400

 

No. 57

Anvil Weight Pounds Face Width Inches Total Length Inches Height Inches Foot Length Inches Hardy Hole Inches Pritchel Hole Inches #57 Price $
165- 4 7/8 26 9 1/2 10 1 + 3/4 1,175
220 5 29 10 1/2 11 1 + 3/4 1,525
275 4 3/4 33 1/2 13 14 1 + 3/4 1,875
330- 5 1/4 32 12 13 3/4 1 + 7/8 2,250
385 4 3/4 37 1/2 14 15 3/4 1 + 7/8 2,625
465 5 40 1/2 14 1/2 16 1/2 1 + 7/8 3,000
550 5 44 16 18 1/2 1 + 7/8 3,750

 

 

Anvil Weight Pounds Face Width Inches Face Length Inches Total Length Height Inches Foot Length Inches Hardy Hole Inches Pritchel Hole Inches #9 Price $
165- 4 7/8 10 25 9 1/2 10 1+ 3/4 1,175
220- 5 12 1/2 29 10 1/2 11 1+ 3/4 1,525
330- 5 1/8 14 32 12 14 1+ 7/8 2,250
380 5 3/4 15 3/4 36 1/2 12 1/2 15 1/4 1+ 7/8 2,625
550 6 1/2 17 1/2 39 1/2 14 1/2 16 1/2 1+ 7/8 3,750
660 7 19 42 1/2 16 18 1+ 7/8 4,500
1035 8 21 1/2 48 17 1/2 22 1 1/4 7/8 6,550
1215 8 1/2 23 1/2 49 1/2 19 23 1/2 1 3/8 7/8 8,000
  #9 Anvils can be special ordered with a side shelf: which adds 20% to the price above.

 

The Pattern No. 11 Anvil is hardened to HRC59 from the tip of the horn to the heel including the cutting table.

Anvil Weight Pounds Face Width Inches Face Length Inches Total Length Inches Height Inches Foot Length Inches Hardy Hole Inches Pritchel Hole Inches #11 Price $
165 4 1/2 16 25 1/2 10 12 7/8 1/2 1,175
330 5 1/2 20 32 14 14 1 + 7/8 2,250

*Unlike most new cast anvils made today, Refflinghaus Anvil face hardness compares to the best of the older wrought iron anvils that had a forge welded & hardened face plate of hot rolled high carbon steel, yet without the potential problem of having the plate come loose.

 **Refflinghaus Anvils are cast and made of a proprietary high grade steel known for its toughness and hardening properties.  For good information on casting steel compared to steel forging see:     http://www.sfsa.org/sfsa/pubs/cvf/ecs.html.

For other information on anvils see: "ANVILS" on my "Dick's Short Tips Page".

---Back to Home Page---