www.blksmth.com

American Express

 

HOME

REFFLINGHAUS ANVILS - FOR SALE

THE BLACKSMITH & SHOP

GALLERY

"HOW TO", Shop Tips, Coal Forges, and Misc. Information

LINKS TO ASSOCIATED SITES

LINKS TO PHOTOS OF THE PAST

A PLACE TO COMMENT

JO'S HAND TIED BROOMS

 

 


ANVIL ACCESSORIES

Wobble free ANVIL STANDS - Fabricated

 No wobble, three legged, anvil stands sit very solid on an uneven floor.  Anvil stands are sized for 165 (180), 220, 275, 320, 460 lb. anvils.  Prices without the tool holder are $550.00 for all but the 460 lb. anvil stand which is $600.00. They weigh between 100 and 130 lb. each.  The anvil base sized to fit the anvil  is 1 1/4 inch plate and includes integrated bending forks.  The legs are 2 inch by 4 inch by 1/4 inch thick iron.  They are designed to make the anvil 32 inches high.  Blocks can be placed under the feet to make them taller.  Custom height anvil stands can be made for an additional $100.00 and additional wait time.  Anvils bolt solidly to the stand making a very solid integral unit, which has the effect of increasing the weight of the anvil.  The easy to use fastening system and the flat bottom of the anvils also eliminates any loud ringing of the anvil.  The tool holder $50.00 can be used for hammers, tongs, or hardie tools.  Stands are designed to be bolted to a concrete or wood floor or pegged into dirt, if desired.

No wobble Hot Cut hardies.  $50.00 each plus shipping of $7.00

Made to fit most Refflinghaus Anvils.  They are made by David Custer, Fiery Furnace Forge Blacksmith, L.L.C. out of oil hardening steel.  They are not heat treated and for hot cutting only.  They will not stand up to cold cutting. They are a Brian Brazeal design and wedge into the hardy hole after a hammer blow or two, and do not wiggle like a normal hardie.  A hammer blow on the side loosens them.  They can probably be heat treated by the user if desired.

-- Back to Refflinghaus Anvils --